PT EXTREME CLEAN

PT Extreme Clean is a highly effective non-acidic cleaner for horizontal masonry surfaces. It can be successful in the removal of light to moderate soiling, most grease and oil deposits, rubber heel marks, some oxidation stains and certain other surface deposits.

MSDS Sheet Find a dealer

Details

PREPARATION

All projects should start with a test application to determine cleaner suitability, dilution ratio and acceptable method for application. Test areas of at least 10 square feet are recommended and should involve the most severely contaminated area. The final determination of product acceptance should not be made until the test area has become dry.

APPLICATION

PT Extreme Clean is most effective when applied by low-pressure spray. Brush application and agitation may prove helpful on some surfaces. Dwell times are from 5 to 30 minutes. Removal of the cleaner and contaminant can be accomplished most successfully with pressure washing equipment. A thorough rinsing is required. Dilutions are 0 to 5 parts water.

LIMITATIONS

PT Extreme Clean is for use by professional contractors only. Projects where complete rinsing cannot be accomplished will require an additional neutralization step. Contact Perma-Treat for recommendations.

TECHNICAL DATA

Appearance: Clear Liquid	Solubility: 100%
Biodegradable: Yes	Odor: Mild Citric
Density: 9.1 Lbs./Gal.	pH Level: 14 (concentrate)
Emulsification: Excellent	Rinsing: Complete
Flash Point: None	Stability: Good
Foaming: High	Wetting Ability: Excellent

SAFETY

This product must be used only as directed. Safety matters included with product. MSDS available for download here.

Only the best products will receive the Perma-Treat name